Epoxy mastic (epoxy gel)
600,000 تومان
For longer durability, mastic is better, the lid of the buckets is completely closed, away from direct sunlight and kept at a temperature below 20 degrees Celsius .
Superior quality
Guaranteed quality of products
Variety of products
Variety and product updates
Fast support
Call during office hours
Research and development
The latest in the world
Description
Epoxy mastic is based on epoxy resin and amino hardener. Epoxy gel can be used in various industries such as stone cutting, stone restoration and care, especially marble stone, stone restoration, constructions, etc. This mastic has excellent polishing ability, it does not swell over time, it has high adhesion on the surface and chemical resistance, it is resistant to atmospheric conditions and moisture, and it has a small and safe smell for users.
Additional information
| Weight | 10 kg |
|---|
Reviews (0)
Related products
Epoxy resin 139 and epoxy hardener 502
This product is used to repair the back of the stone and modify (epoxy) the surface of the stone and for short stone processing lines, when speed is important. Due to its lower curing speed than REP-140, this product is used in Warm seasons are recommended. Also, this product has acceptable stability against ultraviolet rays and has a high purchase value.
Epoxy resin 140 and epoxy hardener 502
This product is used to repair the back of the stone and modify (epoxy) the surface of the stone and for short lines of stone processing, when speed is important but color change is not. This product is recommended in the cold seasons due to its high cooking speed. Also, this product has an acceptable resistance to ultraviolet rays and has a high purchase value.
Mastic Type 3
Type 3 mastic is a two-component mastic based on unsaturated polyester resin, which is designed and produced in order to fill the pores and correct the surface and lacing of building stones but sometimes it is used for sculpture and some decorative activities.
These mastics are offered in 3 degrees of viscosity (low-LV viscosity), medium (MV) and high (HV) and with dry speed, A0, A1 and A2 .
Semi-transparent Mastic 101
Semi-transparent type 3 mastic is a two-component mastic based on unsaturated polyester resin, which is designed to fill the pores and correct the surface and lacing of marble stones and has been produced and is the tonality of marble stones, and sometimes it is used for sculpture and some decorative activities.
semi-transparent mastic 104
Type 3 semi-transparent mastic is a two-component mastic based on unsaturated polyester resin, which is designed and produced to fill the voids and improve the surface and bonding of marble stones, and it has the same tonality as marble stones, and Sometimes it is also used for sculpting and some decorative activities.
Temperature: 28 c
Percentage of curing agent: 1 volume unit (30 mL) of 1mm film
User opportunity 11 14 minutes
Gel time 12 16 minutes
Hardening time 31 38 minutes
Type 1 coope mastic
Rangin resin mastics have high flammability, so they must be kept away from direct flame and high heat .
Uses :
This product is designed and produced in order to reduce consumer cost based on the optimal price point – quality. This product has the lowest environmental yellowing and the highest color stability using UV resistant pigments
Reviews
There are no reviews yet.