Epoxy resin 270 and epoxy hardener 320
540,000 تومان
HR 310 epoxy hardener
1,270,000 تومان
HR 320 epoxy hardener
1,270,000 تومان
Curing agent HR-320 is a curing agent that has stable optical properties, flexible, high penetration, very low viscosity, low curing speed (reticulation) and is considered a part of modified cycloaliphatic amines.
Superior quality
Guaranteed quality of products
Variety of products
Variety and product updates
Fast support
Call during office hours
Research and development
The latest in the world
Description
Storage and maintenance
HR-320 is a moisture absorbent and should be stored at room temperature (15 to 25 degrees Celsius) in a moisture-free environment in the original container with a sealed lid. In this case, the storage time is at least four months after the production date.
Additional information
| Weight | 1 kg |
|---|
Reviews (0)
Related products
Epoxy Mastic
These mastics are in the basic state for travertine stones, but they are produced in the special group of marble (HA) and marble (semi-transparent codes). This product has the lowest environmental yellowing and the highest color stability using UV-resistant pigments. (The weight of the mastic bucket is 7 kg
Epoxy resin 140 and epoxy hardener 502
This product is used to repair the back of the stone and modify (epoxy) the surface of the stone and for short lines of stone processing, when speed is important but color change is not. This product is recommended in the cold seasons due to its high cooking speed. Also, this product has an acceptable resistance to ultraviolet rays and has a high purchase value.
Semi-transparent Mastic 101
Semi-transparent type 3 mastic is a two-component mastic based on unsaturated polyester resin, which is designed to fill the pores and correct the surface and lacing of marble stones and has been produced and is the tonality of marble stones, and sometimes it is used for sculpture and some decorative activities.
Semi-transparent mastic 103
Type 3 semi-transparent mastic is a two-component mastic based on unsaturated polyester resin, which is designed and produced to fill the voids and improve the surface and bonding of marble stones, and it has the same tonality as marble stones, and Sometimes it is also used for sculpting and some decorative activities.
Temperature: 28 c
Percentage of curing agent: 1 volume unit (30 mL) of 1mm film
User opportunity 11 14 minutes
Gel time 12 16 minutes
Hardening time 31 38 minutes
Reviews
There are no reviews yet.